Fairly priced Residential & Commercial HVAC Repair, Maintenance, & Install Services in Regency Oaks, FL.

Verify the thermostat is set to Cool, the setpoint is below room temperature, and replace the batteries if needed. Check that the furnace/air handler switch is on, the breaker isn’t tripped, the outdoor disconnect is inserted, and the blower door is latched. If the condensate safety switch is tripped, remove standing water from the drain pan to reset it. If it still won’t start, Comfort Control Specialists can diagnose control, capacitor, or electrical failures quickly.

Confirm the thermostat is on Cool and lower the setpoint, then replace a dirty air filter and allow up to 10 minutes after changes. With power off, clear leaves and debris from the outdoor unit and gently rinse the coil from the inside out. Restricted airflow or a dirty coil can cause warm air, but low refrigerant or compressor issues require a licensed pro. Comfort Control Specialists can test pressures, locate leaks, and restore proper cooling safely.

Turn cooling off and run Fan Only for 60–90 minutes to thaw the indoor coil. Replace clogged filters, open closed supply and return vents, and ensure mechanical room doors aren’t sealed shut. Persistent icing often indicates low refrigerant, a failing blower, or a metering device issue. Comfort Control Specialists will pinpoint the cause and prevent repeat freeze-ups.

Shut power off at the thermostat and breaker if you smell burning, see smoke, hear loud grinding or hissing, the breaker repeatedly trips, or water is overflowing. Clear a clogged condensate line by attaching a wet/dry vac to the outside drain to pull blockage, then flush with a cup of distilled vinegar if accessible. Do not run the system with panels removed or when icing or flooding is present. Comfort Control Specialists provide same-day emergency service for electrical, refrigerant, and drainage issues.